Prepping The Garage — January 24, 2015

Prepping The Garage

While preparing the garage I’ve had 3 goals in mind;

  • Make it more secure
  • Upgrade my tool set a bit
  • Have a general clear out and make some space

Here’s a wide shot of the garage after I’d finished today. As much as it’s possible to love a room, I love this garage.


We only moved into the house in October 2013. When we were looking at different places, the garage and outdoor space of this house stood out for me. The inside is nice too of course 😁

One of the killer selling points was the inspection pit!


Now I’ve used it a few times, it’s a bit close for comfort to the left hand wall. It’d have been much better slap bang in the middle of the garage.

As I started using the garage, I had to add a whiteboard to one of the walls. I know it’s a bit sad but it’s surprisingly useful. It tends to just end up as a shopping list for various little projects at the moment.


The area I’ve probably put the most work into is the workbenches. The tool rack reflect the things I use pretty well. So far this has been all about DIY jobs round the house, so it may change with time.


In the drawers I then have areas for

  • Metalwork – measuring equipment, scribe, centre punch, tin snips, engineer’s blue etc
  • Electrics – Wirestrippers, plier set, screwdrivers, cutters etc
  • Drawer of shit – This one needs sorting out ☺
  • Rags – lots of them

On the shelves I’ve also got 3 socket sets, a torque wrench, impact bar and a gear splitter. I’m not sure the scenarios in which I should use the last one yet. It was a Christmas present from my brother after saying “please get me the one useful tool you think I won’t have”. It seems like it’d be useful where I need to pull something straight off a shaft?

The vice is also a new addition. I’ve never had one before and I’m loving it. Super useful…

I just need to clear some more space on the shelves for parts and I’m good to go. I want to sell as much as I can from the donor and I’m also hoping to re-use the loom. So I have lots of sealy bags, stickers, sharpies and a Haynes manual… plus a number of mazda mx5 PDF downloads and a link to this page on stripping a miata)


I’m a little scared of starting, but I think I’ll take a few days off work, cancel the insurance and start with the interior.

Sourcing a Donor Car — January 21, 2015

Sourcing a Donor Car

As I’ve said in a previous post, one appeal of building an SR2 Roadrunner is the fact that it uses an MX5 donor. These are currently abundant in the UK, plentiful under £1,000 and by all accounts a decent car in their own right.

So… How do I get the right one?

Which type of MX5 do I want / need?

Taking it one version at a time:

  • Mark 1 (NA) – Ran from 1989 to 1997 and stands out with it’s combination of stubby nose & pop-up headlights. These were available in 1.6L or 1.8L with a 5 speed manual box. It’s also possible to find imports with an optional LSD (Viscous LSD on the 1.6L and Torsen LSD on the 1.8L). Having looked around at a few, it’s possible to find a cheap mk1 that has been much loved with a number of uprated parts e.g. turbo! 😀
  • Mark 2 (NB) – Was available from 1998 to 2005. There are still quite a few of the older ones available for under £1k. The NB was offered with either a 1.6L or 1.8L engine and LSD on some imports much the same as the NA. This was a new iteration on the engines, but I won’t go into details as I don’t understand the ins and outs yet 🙂 Some additions to the UK NB were an optional 6 speed box and / or LSD. I struggled to find clear information on if these were offered as straight forward options. A guaranteed way to get a Torsen LSD though is to find a “1.8i S” rather than the standard “1.8i”. This difference in model shows in the log book if you’re unsure
  • Mark 3 (NC) – Has been available from 2005 to the present day. These have been outside the price range in which I’ve been hunting for a donor, so I’ve looked into them very little. I guess it’d be possible to source one if you looked for a Cat D/C/B salvage but I have no way to transport something like this.

Where do I find it?

My method for searching was pretty simple. I set-up email alerts on the following;

Anyone else have a suggestion for other places to hunt?

What am I looking for when I buy it?

The following was the checklist I was working to. I don’t claim it to be comprehensive as I’m far from an expert;

  • Ask the guy to tell you the story of the car. How long has he had it? What’s he had done? What does it need doing? Why is he selling?
  • What are the panel gaps like? Has it had a bump?
  • Can you feel a lip on the brake discs?
  • How much tread is on the tires?
  • Are there any signs of leaks in the engine bay? Or from underneath?
  • Is the engine warm? i.e. did he warm it up in advance?
  • What is the oil level like? i.e. does he look after it
  • Is there any mayonnaise under the oil cap?
  • Get him to start it while you watch the exhaust. Watch out for blue smoke
  • Does the cam-belt shimmy?
  • Do all the lights work as they should? (don’t want to get stopped on the way home)
  • Test Drive – Assuming you’re not driving, get him to let you shift through some of the more common gear changes. Do they feel nice and smooth?
  • Test Drive – Listen listen listen…
  • Log Book – Is it really a “1.8i s”?
  • Service History – How much money has been spent on it in the past couple of years? What was the work?

If you want something a little more thorough then here is a good guide on pistonheads

To be honest though, I was looking for “good enough”… At the right price… And near enough to home that it’s practical.

What did you end up getting?

So… After looking around for a month or two, I found a 1.8i S NB in Edgeware for £750. This was a 2 hour train journey for me the day before New Year’s Eve (my wife refused to drive on the motorway to take me to buy a banger she didn’t want around). With this much of a round trip I was crossing my fingers it was good enough to buy!

From the advert it sounded work a punt. It had 116k miles with a recent timing belt change, only 3 owners, new rear tires and rotting bodywork. One guy had owned it for most of its life and maintained it well. The most recent owner was selling up to move up to Manchester with his girlfriend.

Inside the engine bay had no sign of leaks or a mess, brake disks weren’t pitted and the tires turned out to be good all round. The only off-putting thing was a rotten heat shield at the bottom of the manifold rattling around and making it hard to listen out for anything else.

I ended up paying him asking price (as it was priced fairly in the first place) and have enjoyed driving it around for the past few weeks. All I’ve done since is give it a good clean (my daughter washed her hands after getting out of it for the first time), changed the coolant / oil and removed that rattly heat-shield.


Next thing to do is secure the garage properly and clean it up a little before cancelling the insurance and getting to work on stripping the donor!

Keeping Track of Costs — January 20, 2015

Keeping Track of Costs

As I said in my previous post, I know that I’ve underestimated how much this is going to cost me. When I’m finished I’d like to know how much I’ve spent (to the penny).

I’d also like to know how much money I think I have left to spend at all times.

With this goal in mind, I’ve created the following google spreadsheet

In here I will keep;

  • A log of all spending
  • A price list of everything I need to complete the build
  • A list of non-essentials I’d like

For posterity’s sake my starting estimate is £11,140 all in. This is already miles out as I’ve not accounted for

  • engine wiring loom
  • dashboard wiring loom
  • delivery for the kit
  • uprated suspension (can’t cut corners)

I’m going to do what I can to help this by breaking what remains of the donor. I’m also considering what it would take to educate myself and make my own loom. Sounds like a bad idea as soon as I type it :mrgreen:

Which Kit Car? — January 15, 2015

Which Kit Car?

I knew I wanted to have a go at building a car… And I knew that I wanted it to be a car I love driving when I’m finished. This left me with a few questions to try and answer before I spent any money.

What is important in the kit and the finished car?

There were a few things I wanted to consider, in the following rough order

  • I’ve got to like how it looks. Straight off, see a picture and if it’s ugly it’s ruled out.
  • What is the rough cost for a starter kit and subsequent stages. Much as I love the look, this ruled out a lot of the cobra replicas instantly.
  • How it will drive when it’s done.
  • What is the donor car. I was looking that needs a relatively cheap, simple and modern donor in plentiful supply.
  • What do other people think of the kit quality and build support
  • How transparent is the pricing for the kit and extras. If your pricing on your website is either obtuse or nonexistent I ruled you out here.

What kit cars can I choose from?

Going through this set of questions with google and a copy of “what kit car” left me with a google spreadsheet of strong possibilities. From these, the ones I seriously considered were

  • Dax Cobra / – These are unarguably beautiful cars and the temptation is there to break the bank on a rumbling V8. The cost and handling are the only things that stopped me here.
  • image

  • Locost Haynes Roadster / – In my braver [sic. more stupid] moments I considered buying a MIG welder, building a jig and letting loose on building my own chassis. I then came to my senses and thought about the consequences of driving this car round a track. May be the next one 😉
  • image

  • Formula Vee / – I think if I were to ever be able to afford a 2nd toy or I had confidence in my welding, this’d be it. As far as affordable racing goes this looks pretty good. I like the thought of playing around with an air cooled flat four too


  • Caterham Academy / – The first thought everyone has when looking at 7 replica kit cars is “what about a caterham?”… Then your friend says ” they have great residual value!”. The simple fact is though that I just don’t think I can afford one. If I won the lottery I’d definitely buy a caterham academy package 😁
  • image

  • MEVabusa / – Now I’m down to the two that I really struggled to choose between! This thing looks properly scary… At 430bhp/tonne it’s got a much higher power / weight ratio than the Porsche had. I also really like the aesthetic of it if you catch it from the right angle. Looking around I struggled to find a Hayabusa donor for a good price though.
  • image

  • SR2 RoadRunner / – There were a number of reasons I opted for a roadrunner. First and foremost it is a seven replica with an MX5 donor. In the UK you can easily get a good MX5 for under £1k right now. Secondly I have read nothing but good things on the build quality and customer service around the SR2. Lots of mentions of a very sorted chassis and zero fettling when fitting the bodywork. Finally, inboard pushrod suspension is offered as an option on the front. I can’t pretend to understand all the physics around this, but my brother tells me it gets more mass away from the wheels and into the middle of the car.
  • image

    What do I think my budget is?

    I was going to go into a decent amount of detail at this stage, but I think I’ll save it for a later post.

    The short version is that after selling the Porsche and paying off the bank loan I had £13k left.

    Pay off credit card, tile the kitchen and get blinds in the lounge I have £10k left.

    With this I need I have allocated

    • £1000 – Donor car
    • £250 – Upgrade my toolset
    • £8750 – Everything for the actual kit car

    I don’t doubt that this will be a long way off and I am expecting I will need to save some as I go. Only hindsight will tell how far off I am.

    Where to Start —

    Where to Start

    The same as most other blokes, I’ve been a bit of a petrolhead since I was a little boy. Throughout my adult life a chunk of my disposable income has ended up going on cars. In chronological order my history is as follows;

    • Mini City 998cc – Had no carpets and you could see tarmac through the floorpan. Taught me how to change a head gasket though and the joys of the A series engine.
    • Renault Clio 1.8 16v – This one was a proper love / hate relationship. To be fair, I abused her and she abused my wallet. I consistently pushed it too hard and ended up blowing another head gasket. Assuming it couldn’t be much harder than the A Series I set to it with my brother. Due to the joys of Renault engineering and an engine too small for the bay we had to winch it out just to get the timing belt cover off!
    • Skoda Favorit 1.3 glx – This thing was a beast. Having cost £275 from an old couple near Bury St Edmonds, it just kept going. I lost the radiator cap… It didn’t care. It chugged along just a little warmer but no water in. Someone tried stealing it (twice)… It didn’t care. The lock on the steering column held firm and the steering wheel just bent. Handled like a boat and probably the scariest car I’ve had. Also the one I’m most nostalgic about though.
    • Skoda Fabia 1.9 TDI – This one was another workhorse. A £900 hand me down from my brother, it had been well maintained. This was the most luxurious interior I’d ever had in a car to this point. The diesel torque was pretty good on the motorway too.
    • Audi TT 225bhp – Compared to the rest, this felt like a rocket ship at the time. It’s hard to pick many faults with it as a day to day car. Really quite a nice interior and a surprisingly large boot. That big single turbo was brilliant too. The only quibble is the sluggish handling and it was a bit unsteady at speed.
    • Porsche 996 Turbo – This… Has been my baby for the past 18 months. I’ve never driven anything quite like it. The speed just keeps coming and the grip / handling are immense. The thing I’m missing most though, is cleaning and polishing it.

    996 turbo

    As I’ve gone through these cars I’ve been less and less inclined to work on them, for fear of making an expensive mistake (or leaving myself off the road). We now have a budding family though (8yr old daughter and 1yr old son), we’ve finished renovating downstairs in the house , I commute by pushbike & train and we own a 1.6 Ford Focus.

    It’s time to do what I’ve wanted to for a number of years. Build and enjoy a kit car!

    Over the coming months (and possibly years) I intend to keep a record of the challenges, joys and pitfalls of building my own SR2 RoadRunner. I’ve put the deposit down on a kit a couple of days ago. Before getting down to it, I’ll put together a few posts on

    • What made me choose a SR2 RoadRunner specifically
    • Sourcing the donor car
    • Getting ready to build
    • Stripping down the donor

    Some of the jobs I mentioned above (head gasket) and a few services are about as sophisticated as I’ve ever gotten. This means that even stripping down the donor car will be a challenge

    Should be fun!! 🙂